In the event that you need to abstain from committing errors when painting wood furniture, you have to remember the accompanying tips. You have to sand the furniture, expel the deposit, take action, then paint it and secure it. In the event that you recall these essential pointers, then you’re painting venture will end up being a win.
Sand the Furniture
While numerous specialists propose you don’t have to sand wood furniture, sanding is in truth an unquestionable requirement. Sand the surface with 150-grit sandpaper by utilizing an orbital sander. Precisely sand off the old paint or the wood, ensuring you don’t gouge the surface territory amid the procedure. You simply need to sand the furniture enough so the groundwork can cling to the furniture. Utilize 80-grit sandpaper on the off chance that you are sanding a household item with a varnish finish.
Remove the Residue and Any Dust Specks
Next, wipe down the furniture surface with a tack cloth. Never use a paper towel because this will leave behind unwanted residue.
Prime the Surface
Use a mini foam roller when priming the furniture. The foam roller is necessary in order to cover any hard-to-reach spots. Allow the primer to dry according to the label instructions. Once the solution is dry, you can sand away drips with a 220-grit sanding block before wiping the surface down with a tack cloth.
Paint the Furniture
Once the furniture is primed, you are at long last prepared to paint it. Once more, utilize a mini foam roller, and apply three layers of a semi-gloss latex based paint. Allow the furniture to dry around eight hours between coats. Sand the surface between each coat in the event that you detect any residue or drips.
Use a New Tack Cloth
Utilize a sanding block and also another tack cloth. By using another tack material is vital as you need to evacuate any sort of build up or residue before you apply the securing layer. A protectant is clear, and anything abandoned will moderate underneath the protectant in the event that it is not removed first.
Protect the Painted Surface
Next, take after the last stride and utilize another froth roller to apply the protectant coat. Ensure this last layer is a polyacrylic water-based gloss. Spread the gloss softly to smooth out any foaming. Make sure to wait 72 hours before using the furniture.
A Few More Suggestions about Painting
In the event that you are painting a household item that elements a flat section, for example, the highest point of a dresser, use long strokes that cover the whole traverse of the outfitting. Doing as such will guarantee a smoother finish. Paint dries rapidly. Along these lines, when you apply the primary coat, the paint will nearly have dried. If the coat is not yet dry, hold up around ten minutes before you apply the following coat.
When you make a sure to sand down to the wood and deliberately apply more thin layers of paint, you ought to be happy with your work. The furniture’s finish will look smooth and you ought to have the capacity to see a portion of the wood’s grain through the paint.
